Regardless of the type of component, we naturally hope for the longest possible service life when using a product, but things do not always go as planned. In many cases, incorrect handling can cause unexpected damage to components. Take bearings, for example: although they are small components, they often play a crucial role; therefore, we must pay close attention to their maintenance and upkeep during use.

Daily Maintenance of Bearings

1. Once a bearing has been installed, it is necessary to apply lubricant before putting it into normal use. For standard bearings, it is incorrect to put them into service without lubrication. Furthermore, before lubricating the bearing, we must first check the production date of the bearing. If the bearing has been in storage for a considerable period, apply several coats of lubricant; there is no need to clean it – simply apply the lubricant directly.

2. Before putting specialised bearings into normal use, inspect their surfaces for any rust that needs to be removed; clean them first, then proceed with normal operation. During installation, every detail must be carried out in accordance with installation standards to avoid suboptimal performance later on.

3. When installing the housing, there are various methods available, such as press-fitting or cold-shrink assembly. Each method has its own advantages, and the appropriate one should be selected based on requirements. Regardless of the method chosen, rust-prevention measures must be taken in advance.

Although bearings are only small components, they play a crucial role in the normal operation of equipment. We must pay closer attention to bearing care and maintenance during use. By mastering the methods and precautions outlined above, we are confident this will contribute to the normal and stable operation of the equipment!